We use cookies on this site to enhance your user experience. By using our web you agree with saving cookies on your computer / device. Settings of cookies may be changed in the settings of your browser.

Email: info@drdlik.co.uk            Monday - Friday 8 am to 5 pm

Introduction » Wood split shingle » Laying shingles

Wood split shingle / Laying shingles

Laying of wood chipped shingles, Wallachian type.

In the following sections, we present the details of laying wooden shingles

Drdlik- laying wooden shingles  Drdlik- packing wooden shingle

  - Shingles can be used to cover roofs that have a slope of 35 to 90 degrees.

- The minimum recommended roof slope is 25 °. The greater the slope, the longer the shingle lifespan. As the old Czech saying goes, "each degree of slope equals another year of lifespan," (without maintenance). Maintenance and coating will extend the lifespan to 50 - 80 years.

- The shingle roofing is laid from bottom to top.

- Do we start from “left to right or from right to left,,? Where the shingle is laid first depends on the prevailing wind direction!

- The roof shingles are toe-tipped against the prevailing wind direction!

- Similarly, the last row on the ridge leaves a 100 mm overlap on the prevailing wind direction.

- For assembly we use galvanized nails.

- We recommend the use of a diffusion foil to ensure 100% water resistance.

- Installation is performed on 6 x 4 cm slats.

- Plank shutters are not recommended due to insufficient ventilation from the bottom of the covering.

- Any roof shape, even the most complex, can be covered with shingles without using any other material, such as sheet metal.

- When laying the shingles down, each one is inserted into the groove and hammered in.

- If you nail the shingle too hard there is a possibility that it will break in half. So, one must be careful and do it gently.

- Shingle is nailed to the roof spatially dried, with max. 20 % wood moisture.


Basic types of laying

Simple - laying one layer of shingles

- This method is suitable mainly for shelters, garden houses, roofs and farm buildings. The shingles overlap each other by 10 cm.

Double - laying two layers of shingles

- This method is suitable for all types of roofs, especially residential, where we want to have 100% certainty that there is no leak. The shingle is doubled on the entire roof (there are always two shingles above each other) and the overlap is 25 cm at the most. However, we recommend an overlap of 22 - 24 cm.

Drdlik- laying of wooden shingle
Drdlik- start laying of wood shingle                                        Drdlik- end of laying wood shingle

Drdlik- method of roofs wod shingle


Wall claddings

For buildings with wooden shingles, a simple laying is performed, meaning an overlap of 5 - 10 cm and the tip against the prevailing wind direction.

More on facing walls of shingles.

Drdlik- facing walls of shingles.  Drdlik- facing walls of wooden shingles.



The valleys and corners

For the corners and valleys, we use the conical shingles, so-called corner shingles or “temper”.

Drdlik- the valleys and corners shingle           Drdlík- wood shingle valleys and corners           Drdlik- shingle for corners and valleys




Cost of wooden shingle roof

Each roof is unique and therefore it is not possible to use a simple mathematics and price list when determining its price. Our estimates are based on experience. However, we will be happy to calculate the price for you free of charge.

- Please enter as complex dimensions as possible, because the more accurate are the data you enter, the more accurate will the material consumption calculation be.

- Contact details - Roofing - Dimensions - Attach photos / drawings

If we are unable to process the offer based on the information provided, we will contact you to arrange further action.

- Bids are normally sent within 5 working days. If this is too long for you, we will be happy to give you a priority if you notify us.


In addition to the exact calculation of roofing and necessary accessories, you will also get the ideal solution draft, many years of experience + professional consultancy and advice + free training.



However, if you want to calculate the roof area yourself, here is a helpful hint how to do it.

When calculating how many m2 of shingle is needed per roof area, do not forget the shingle overlap.
- Wooden shingle is packed in 1 m² package, double laying (that’s 4 running meters).


What it means: if we still have the same package but different laying?

4 rm - double laying, it is in a package of 1 m² (25 cm overlap)
- 4 rm - simple laying, it is in a package of 1.5 m² (with a covering overlap of 10 cm)


For better orientation
you can find specifications in the table below: (1 pack = 1m² double installation (at 25 cm overlap), which is 4 rm when straightened into the groove to the normal length).

- We recommend an overlap of about 23 - 24 cm. The overlap of 25 cm is the upper limit.
- We recommend the use of a diffusion foil to ensure 100% water resistance.


Type of installation

Roof in m²

Shingle overlap

Final consumption of shingles in package


1 package = 1m²


200 m²

10 cm

134 pack.

1 pack. = 1,5m²


200 m²

25 cm

200  pack.

1 pack. = 1m²


200 m²

24 cm

208 pack.

1 pack. = 0,96m²


200 m²

23 cm

217 pack.

1 pack. = 0,92m²


200 m²

22 cm

227 pack.

1 pack. = 0,88m²


An example:

If you calculate a roof area of 200 m², double laying, with an overlap of 25 cm = you will need 200 packages. So far it seems logical. But if you do not pass this information onto the roofer and he will out of experience make a 24 cm overlap (because its better than 25 cm), you will need 208 packages for the 200 m², and therefore you’ll be 8 packages (8 m²) short.


Therefore, do not hesitate to take advantage of our FREE budget offer to avoid unnecessary misunderstandings.

Do not hesitate to contact us and ask us anything on our email address: info@drdlik.co.uk. We’ll gladly answer any questions you might have.


Thank you for your time and interest, Your Drdlík team.